北京恒遠安諾科技有限公司經銷各種歐美*液位計

Echo? 300/301超聲波非接觸式發射器

產品描述：

The Echo Model 300/301 is a full-featured, powerful ultrasonic transmitter for measurement of liquid level, volume, or open-channel flow. Explosion proof approvals are standard for both the transmitter and transducer.

Ative/passive mode for loop-power or device power of 4-20 mA output

16-button keypad and two-line, 16-character LCD alphanumeric display

Explosion proof approvals for both transmitter and transducer

QuickCal? allows complete calibration in 90 seconds

Maximum range of 30 feet (9.1 meters)

Therma? TA2質量流量傳感器

產品描述：

Therma Model TA2 Thermal Mass Flow Transmitter provides reliable mass measurement for air and gas flow applications. The powerful, yet easy to use, electronics are contained in a compact explosion proof enclosure. The TA2 is available with both insertion probes as well as flow body design for smaller pipe sizes. The TA2 offers excellent performance at an exceptional value.

The TA2 offers the user the ability to verify calibration in the field reducing the need for periodic recalibration.

Direct mass flow measurement of air and gas

Excellent low flow sensitivity

High turndown ratios

Low pressure drop

Process temperatures to +400° F (+200° C)

Integral explosion proof enclosure

Eclipse? Enhanced 705導波雷達發射器

產品描述：

The Enhanced Eclipse Model 705 is a 24 VDC loop-powered level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. This single transmitter can be used with all probe types and offers enhanced reliability, as demonstrated by a Safe Failure Fraction of 91%, allowing it to be used in SIL 2 loops.

This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies. The innovative, patented enclosure is a first in the industry orienting both wiring and electronics compartments in the same plane; and, angled to maximize ease of wiring, configuration and data display.

Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and troubleshooting flexibility.

Low dielectric measurement capability (Er >_ 1.4)

Volumetric output

Quick connect/disconnect probe coupling

Operates in visible vapors and ignores most foams

IS, XP, and Non-Incendive approvals

Ignores coating buildup

Echo? 940/941超聲波液位開關

產品描述：

Echo Model 940 and 941 Ultrasonic Level Switches are compact integral units that utilize pulsed signal technology to perform high or low level measurement in a wide variety of liquid applications. These switches feature a 316 stainless steel tip-sensitive transducer that is offered in a variety of NPT, flanged, and sanitary process connections. The compact electronics are compley encapsulated just above the process fitting.

The Model 940 offers a 1-amp SPDT relay output. The Model 941 has a mA current shift output.

Pulsed electronics for excellent performance in difficult process conditions and superior immunity from sources of electromagnetic noise

Advanced transducer design provides reliable operation by draining viscous liquids and ignoring foam in turbulent applications

Suitable for SIL (Safety Integrity Level) 2 loops (FMEDA analysis data available)

Extremely compact unit is easily installed in areas where access space is limited

No calibration or configuration necessary

1 amp SPDT relay output (940), 8/16 mA current shift output (941)

Level1000液面記錄儀

產品描述：

Level1000

The Level1000 is a rugged, submersible, temperature and water level data recorder. It's stainless steel enclosure makes it perfect for use in harsh, chemical and corrosive environments. The Level1000 is also equipped with an internal temperature sensor for recording temperature, as well as water level data. Data can be displayed in standard or metric units.

Echo? 960 AS-Interface?超聲波液位開關

產品描述：

Echo Model 960 Ultrasonic Level Switches use pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for a wide variety of critical level applications.

Model 960 Switches use Actuator-Sensor-Interface (AS-i) bus digital communications for high or low single point liquid level measurement. AS-i is a versatile, low cost cabling solution that is a digital replacement for traditional hard wiring of field devices. The AS-i bus system provides a digital serial interface with a single unshielded two-wire cable for power and data transfer.

The industrial version of the Model 960 has a cast aluminum electronics housing and a wide variety of threaded or flanged versions of the ultrasonic transducer. The sanitary version is offered in a deep drawn 304 stainless steel housing and transducers with a 20 Ra surface finish.

Model 960 Switches use Actuator-Sensor-Interface (AS-i) bus digital communications for high or low single point liquid level measurement. AS-i is a versatile, low cost cabling solution that is a digital replacement for traditional hard wiring of field devices. The AS-i bus system provides a digital serial interface with a single unshielded two-wire cable for power and data transfer.

Patent pending technology provides unsurpassed reliability and testing of electronics, transducer, piezoelectric crystals, and electromagnetic noise

Adjustable time delay for turbulent aerated liquids

Tip-sensitive transducer measures level within 1/4" of the vessel bottom

Pulsed signal technology provides superior performance in difficult process conditions

AS-i output reduces cabling costs and simplifies installation.

Digital E3電子液面?zhèn)鞲衅?/span>

產品描述：

The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.

The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.

Two-wire, loop-powered, transmitter for level, interface or density measurement

No level change needed for configuration; no field calibration necessary

Safety Integrity Level (SIL) value of 2, SFF value of 92.3%

4-20 mA output signal

Two-line, 8-character LCD and 3-button keypad

Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43

Kotron? 82CE發射機

產品描述：

Model 82CE transmitter is one of the most cost effective level transmitters available today. Compact in size, it employs state-of-the-art surface mount technology in an encapsulated module for a stable, accurate measurement.

4-20 mA isolated output signal

Loop powered

Intrinsically safe

UDZ-3磁浮子翻板指示液位計

產品描述：

UDZ-3電遠傳磁浮子翻板指示液位計 產品概述

    BACAC系列UDZ型液位計的磁翻板指示器拆裝快捷方便，安裝方位可任意選擇，觀察方向可隨意改動，因而儀表指示的可視度很大:UDZ型液位計的性能價格比明顯高于采用多組玻璃板式液位計的性能價格比:UDZ型液位計的指示器、發訊器、以及液位變送器均與主體內被測介質*隔離的結構設計，使液位計工作在有壓(可達320kg)、有毒和易燃的工況下，具有的安全性和可靠性;UDZ一3型采用了新穎設計，提高了傳感器的靈敏度，其遠傳信號近乎零溫漂和*穩定性使其始終干現場液位指示保持*;傳感器和主體有一定的間隔，因而能有效地解決高溫液體(可達480℃)的遠距離檢測和控制;
    鑒于UDZ型液位計上述的種種特點，其已被廣泛地應用于石油、化工、輕工、電力、核工業以及食品、醫藥等工業中，對各種塔、罐、槽、箱等容器中介質的液位進行檢測和控制。

UDZ-3基型電遠傳磁浮子翻板指示液位計/B本安防爆型

    該液位計主要由主體、磁浮子、傳感器、變送器和翻板指示器五部分組成。其工作原理是以主體內的磁浮子隨液位的升降而同時吸合傳感器內相應位置上的干簧管，從而使傳感器內的總電阻(或電壓)發生相應的變化，然后通過變送器將電阻(或電壓)的變化轉變成4-20mA·DC的標準電流輸出，再由我司專門配套生產的XTP-101型數顯液位控制儀或SWP型光柱數顯儀顯示液位和設定上、下限報警，實現液位的位式控制或調節。或者與其它可以接受4-20mA·DC信號輸入的任何顯示儀或調節器相配套，實現對液位的遠距離顯示、位式控制、斷續或連續的PID調節。

技術參數

環境溫度:-10-+50℃
介質溫度:≤80℃，也可以制作成≤480℃
輸出信號:4-20mA·DC
供給電源:24V·DC±5%
測量精度:L=500-1000mm≤±1.5%FS, L>1000mm≤±1.0%FS
負載電阻:0-750Ω
防爆標志:ib II CT5
關聯設備:JHA-B安全柵
其余參數和UDZ-I型相同

UDZ-1磁浮子翻板液位計

產品描述：

UDZ-1磁浮子翻板液位計產品概述

    BACAC系列UDZ型液位計的磁翻板指示器拆裝快捷方便，安裝方位可任意選擇，觀察方向可隨意改動，因而儀表指示的可視度很大:UDZ型液位計的性能價格比明顯高于采用多組玻璃板式液位計的性能價格比:UDZ型液位計的指示器、發訊器、以及液位變送器均與主體內被測介質*隔離的結構設計，使液位計工作在有壓(可達320kg)、有毒和易燃的工況下，具有的安全性和可靠性;UDZ一3型采用了新穎設計，提高了傳感器的靈敏度，其遠傳信號近乎零溫漂和*穩定性使其始終干現場液位指示保持*;傳感器和主體有一定的間隔，因而能有效地解決高溫液體(可達480℃)的遠距離檢測和控制;
    鑒于UDZ型液位計上述的種種特點，其已被廣泛地應用于石油、化工、輕工、電力、核工業以及食品、醫藥等工業中，對各種塔、罐、槽、箱等容器中介質的液位進行檢測和控制。

UDZ-1基型磁浮子翻板指示液位計

     該液位計是以浮子內磁鋼驅動雙色薄片的翻轉來指示液位的一種新型儀表。主體內磁浮子隨液位的升降而上下運動，同時驅使主體外指示器內的雙色薄片翻轉，有液位時轉示紅色、無液位時轉示黑色。紅色和黑色色帶間的界線即代表液位高度。在指示器左側配有醒目的刻度標尺，從而使液位的指示顯得更加清晰。

技術參數

測量范圍:200-15000mm
測量精度:±10mm
介質溫度:≤480℃
介質比重:≥0.4
介質粘度:≤0.02Pa·S

OES-100E-001液位開關

產品描述：

OES-100E-001液位開關

The Model OES-100 snap switch is utilized to expand the control capabilities of Orion’s extensive line of magnetic level indicators.

This cam-operated double pole double throw mechanism is clamp-mounted to the outside of the MLI. This mounting style allows easy addition or repositioning of switches without disruption of the process.  Designed for optimal repeatability and reliability, the OES-100 is actuated by simple magnetic coupling.

For use in Installation Category II, Pollution Degree 2. If equipment is used in a manner not specified by the manufacturer, protection provided by the equipment may be impaired.

The Model OES-100 snap switch is a cam-operated double pole double throw mechanism clamp-mounted to the outside of the MLI.

The OES-100 is actuated by simple magnetic coupling. As the liquid level moves, the MLI float (with its internal magnets and flux rings) follows. When the float

moves into the proximity of the snap switch, the switch magnet interacts with the float’s magnetic field actuating the switch. The bi-stable design of the switch ensures that it will not reset until the float passes the switch in the opposite direction.

UDZ-1D/3D/B磁浮子翻板指示液位計

產品描述：

UDZ-1D,UDZ-3D/B插入型

產品概述 

    BACAC系列UDZ型液位計的磁翻板指示器拆裝快捷方便，安裝方位可任意選擇，觀察方向可隨意改動，因而儀表指示的可視度很大:UDZ型液位計的性能價格比明顯高于采用多組玻璃板式液位計的性能價格比:UDZ型液位計的指示器、發訊器、以及液位變送器均與主體內被測介質*隔離的結構設計，使液位計工作在有壓(可達320kg)、有毒和易燃的工況下，具有的安全性和可靠性;UDZ一3型采用了新穎設計，提高了傳感器的靈敏度，其遠傳信號近乎零溫漂和*穩定性使其始終干現場液位指示保持*;傳感器和主體有一定的間隔，因而能有效地解決高溫液體(可達480℃)的遠距離檢測和控制;

   鑒于UDZ型液位計上述的種種特點，其已被廣泛地應用于石油、化工、輕工、電力、核工業以及食品、醫藥等工業中，對各種塔、罐、槽、箱等容器中介質的液位進行檢測和控制。

UDZ-1D、UDZ-3D/B插入型
磁浮子翻板指示液位計

該液位計適用于地下槽、池的液位測量和控制。

技術參數

測量范圍:L≤3500mm
介質粘度:≤0.1Pa·s
介質溫度:≤80℃，也可制作成≤480℃
其余參數:UDZ-1D同UDZ-1
UDZ-3D同UDZ-3
容器法蘭:規格HG20593-97(FM)

OES-100電磁開關

產品描述：

The Model OES-100 snap switch is utilized to expand the control capabilities of Orion’s extensive line of magnetic level indicators.

This cam-operated double pole double throw mechanism is clamp-mounted to the outside of the MLI. This mounting style allows easy addition or repositioning of switches without disruption of the process.  Designed for optimal repeatability and reliability, the OES-100 is actuated by simple magnetic coupling.

For use in Installation Category II, Pollution Degree 2. If equipment is used in a manner not specified by the manufacturer, protection provided by the equipment may be impaired.

The Model OES-100 snap switch is a cam-operated double pole double throw mechanism clamp-mounted to the outside of the MLI.

The OES-100 is actuated by simple magnetic coupling. As the liquid level moves, the MLI float (with its internal magnets and flux rings) follows. When the float

moves into the proximity of the snap switch, the switch magnet interacts with the float’s magnetic field actuating the switch. The bi-stable design of the switch ensures that it will not reset until the float passes the switch in the opposite direction.

ORS-300電磁開關

產品描述：

The Model ORS-300 reed switch is available to augment the control capabilities of Orion’s extensive line of magnetic level indicators. Housed in an explosion proof stainless steel enclosure, the ORS-300 mounts to the outside of the MLI via clamps.

Each switch is designed for optimal repeatability and reliability.

For use in Installation Category II, Pollution Degree 2. If equipment is used in a manner not specified by the manufacturer, protection provided by the equipment may be impaired. This mounting style allows addition or repositioning of switches at any time, without disruption of the process.

The Model ORS-300 reed switch is housed in an explosion proof stainless steel enclosure, the ORS-300 mounts to the outside of the MLI via clamps. This mounting style allows addition or repositioning of switches at any time, without

disruption of the process.

The magnetic field produced by the MLI float actuates the ORS-300 when the liquid level moves the float into the proximity of the reed switch. The switch is bi-stable, so it will not reset until the float’s magnetic field passes it in the opposite direction.

UDZ-1J/3J/B磁浮子翻板指示液位計

產品描述：

UDZ-1J,UDZ-3J/B磁浮子翻板指示液位計 產品概述

    BACAC系列UDZ型液位計的磁翻板指示器拆裝快捷方便，安裝方位可任意選擇，觀察方向可隨意改動，因而儀表指示的可視度很大:UDZ型液位計的性能價格比明顯高于采用多組玻璃板式液位計的性能價格比:UDZ型液位計的指示器、發訊器、以及液位變送器均與主體內被測介質*隔離的結構設計，使液位計工作在有壓(可達320kg)、有毒和易燃的工況下，具有的安全性和可靠性;UDZ一3型采用了新穎設計，提高了傳感器的靈敏度，其遠傳信號近乎零溫漂和*穩定性使其始終干現場液位指示保持*;傳感器和主體有一定的間隔，因而能有效地解決高溫液體(可達480℃)的遠距離檢測和控制;
    鑒于UDZ型液位計上述的種種特點，其已被廣泛地應用于石油、化工、輕工、電力、核工業以及食品、醫藥等工業中，對各種塔、罐、槽、箱等容器中介質的液位進行檢測和控制。

UDZ-1J、UDZ-3J/B耐強腐蝕型
磁浮子翻板指示液位計

該液位計所有與介質接觸的零部 件均采用鋼塑復合管。所以能適用于各種強腐蝕介質的液位測量和控制。

技術參數

介質溫度:≤200℃
鋼襯聚丙烯:-25-110℃
鋼襯聚乙烯:-15-70℃
鋼襯聚氟類:-100-250℃
其余參數:
UDZ-1J同UDZ-1
UDZ-3J同UDZ-3

UDZ-1W,UDZ-3W/B磁浮子翻板指示液位計

產品描述：

UDZ-1 W,UDZ-3 W/B磁浮子翻板液位計

產品概述

    BACAC系列UDZ型液位計的磁翻板指示器拆裝快捷方便，安裝方位可任意選擇，觀察方向可隨意改動，因而儀表指示的可視度很大:UDZ型液位計的性能價格比明顯高于采用多組玻璃板式液位計的性能價格比:UDZ型液位計的指示器、發訊器、以及液位變送器均與主體內被測介質*隔離的結構設計，使液位計工作在有壓(可達320kg)、有毒和易燃的工況下，具有的安全性和可靠性;UDZ一3型采用了新穎設計，提高了傳感器的靈敏度，其遠傳信號近乎零溫漂和*穩定性使其始終干現場液位指示保持*;傳感器和主體有一定的間隔，因而能有效地解決高溫液體(可達480℃)的遠距離檢測和控制;
    鑒于UDZ型液位計上述的種種特點，其已被廣泛地應用于石油、化工、輕工、電力、核工業以及食品、醫藥等工業中，對各種塔、罐、槽、箱等容器中介質的液位進行檢測和控制。

UDZ-1 W , UDZ-3 W/B保溫型磁浮子翻板指示液位計

該液位計是在基型的主體外安裝一個保溫夾套而構成，通入蒸汽等熱媒劑，可以保持主
體內液體的正常流動，因此適用于易凝固液體的液位測量和控制。對于低沸點液體可通入冷水等冷媒劑，以保證液體的穩定，使儀表正確指示出被測液位。

基本參數

介質粘度:≤0.15Pa·S
基本參數:UDZ-lW同UDZ-1
UDZ-3W同UDZ-3

BM26磁浮子液位計

產品描述：

BM 26(G)是金屬管結構，帶有標尺，磁性翻板或磁浮子指示液位、界面，并可安裝液位變送器，液位開關，適用于開放或封閉壓力容器內的液位或界面測量的液位計。根據用戶需要，BM26（G）可以安裝4-20mA遠傳信號輸出變送器，開關信號傳送器，數字液位顯示器。高溫、高壓、低密度特殊浮子的設計，鈦材，316L，PTFE襯里等防腐材料選用，X-射線探傷檢測，可以保證產品適用于任何現場需求。

結構簡單，堅固可靠，運行穩定
磁翻板、磁浮子密封在玻璃管中
大尺寸刻度，醒目易讀
測量介質與顯示、信號輸出密封隔離
可以安裝4-20mA液位變送器
可以安裝液位開關傳感器
多種防腐材料選擇304，316，316L，鈦，哈氏合金等
多種安裝形式
多種連接形式

BM26G磁浮子液位計

產品描述：

zui高*公稱壓力≤25MPa（特殊要求40MPa）
zui高*介質溫度≤400℃
zui低*介質溫度-200℃
介質密度≥0.3g/cm³
界面測量（密度差≥0.1g/cm³）
適用于沙塵，海風，多雨的環境條件
具有浮子失效顯示

KEY電纜浮球液位開關

產品描述：

該產品的顯著特點是性能穩定可靠（不因液面的波動而引起誤動作），同時，它還具有無毒、耐腐蝕、安裝方便、價格低廉、使用壽命長等特點。

技術參數：